the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ultra start and evo all 03 liberty


Post ReplyPost New Topic
< Prev Topic Next Topic >
atppf 
Member - Posts: 14
Member spacespace
Joined: September 28, 2013
Posted: November 13, 2013 at 9:59 PM / IP Logged  
The Fortin instructions say 4.06MAX Firmware. I flashed another evo-all to the most current firmware regardless of the instructions, re-programmed to vehicle and it works fine now.
Thanks for everyone's help, awesome site!!!!
atppf 
Member - Posts: 14
Member spacespace
Joined: September 28, 2013
Posted: November 23, 2013 at 10:26 AM / IP Logged  
Anyone have any ideas why the vehicle would run rough when remote started but runs smooth once key taken over. Seems very odd????
shift_happens 
Member - Posts: 45
Member spacespace
Joined: November 25, 2013
Location: Quebec, Canada
Posted: November 25, 2013 at 11:19 AM / IP Logged  
make sure everything is powered correctly at the ignition harness when the car is remote started
atppf 
Member - Posts: 14
Member spacespace
Joined: September 28, 2013
Posted: November 27, 2013 at 12:42 AM / IP Logged  
shift_happens wrote:
make sure everything is powered correctly at the ignition harness when the car is remote started
Yes this was the first thing I did, all was well.
I got it fixed up, switched from d2d to w2w and works great every time now.
Thanks for all the help guys
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 9, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer