2000 ford ranger remote start and now

Home / the12volt's Install Bay / Car Security and Convenience / 2000 ford ranger remote start and now (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 27, 2014 at 4:48 PM / IP Logged

Just installed a astrostart rs-721 with a idatalink tb in a 2000 ford ranger followed directwire for wiring and tested all wires with digital multimeter. Truck had no power door locks. Now customer is saying 4x4 is not working. My fault I did not test before. Where should u start if not fuses

Any help would be appreciated.

Back to Top

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: January 27, 2014 at 7:25 PM / IP Logged

Make sure the ignition switch wires are powered properly. Directwire shows that vehicle has one ignition, two accessory wires. Does the grey / YELLOW drop out when cranking? BLACK/ light green also? Does the 4x4 not work with either the key and remote start? Assuming it's a switch on the dash...is it plugged in?

Mark

Back to Top

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 27, 2014 at 10:04 PM / IP Logged

Yes all wire done and test before, pulled battery cable for ten min put back on then everything was working, not sure what it was

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 ford ranger remote start and now

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.