the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Low Pass cutoff


Post ReplyPost New Topic
< Prev Topic Next Topic >
luxuryrules 
Copper - Posts: 102
Copper spacespace
Joined: March 17, 2003
Location: United States
Posted: May 17, 2003 at 9:32 AM / IP Logged  
Ok, I have a pair of 12" JBL subwoofers (presumably the GT series - bought them used) in a sealed box hooked to a Lanzaar Vibe 420 Amp, bridged to send 200w rms 400w peak to each sub.  I'm just curious to see, what does anyone think is a good cutoff frequency for the low pass?
wvsquirrel 
Gold - Posts: 1,237
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 27, 2002
Location: Florida, United States
Posted: May 17, 2003 at 9:40 AM / IP Logged  
start around 80-100
Squirrel
"No more Cpt. Kirk chit chat"
If its too loud, then you're too old
Donate to the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer