viper 5904 will not remote start.

5904 won't remote start, but it seems like it goes thru the motions, unlock doors, instrument lights on, remote says- remote start activated. My key starts it. Any ideas?

When you say your key starts it, does leaving the key in the ignition switch make it work?

Sorry, to clarify I meant starting it with the key. I just tries leaving the key in the ignition and remote starting it and I can hear it lock the doors but does not start it.

tried, spell check got me.

Have you got the fold out pages i.e. brief reference guide? Look at far right, top, Remote Start Shutdown/Startup diagnostics and follow it.

I'll check now.

Ok I have it, Let me check it.

Ok It's telling me..... Transmitter shutdown (or optional push button.

Wish I knew what that meant. Not having a joke, I've absolutely no idea what it means.

Me too, The error is 4 flashes on the control panel and no flashing tail lights. The Quick reference guide does not say that the tail lights will flash on a shut down error but says they flash on a start up error. I assume since there are no flashing tail lights and the control panels flashes four times it is indeed a shut down problem and not a remote start problem even though it will not remote start. Sounds to me like something is telling it not to start. Here's what the guide says (Transmitter shutdown (or optional push button). Since it says optional push button I would think that to mean trunk, door, or hood pin but it should show me an error code for those faults. After reading some forums: Since the remote says it's remote started and the dash lights and radio come on I have to think it's not completing the ignition circuit. I am wondering now if it's the bypass module(DBALL).