Viper 5706v, 2010 Hyundai Elantra

Positive.

Here's a diagram except it it may not work, something Catback said earlier about not needing a DB-ALL2 at all if you don't have an immobiliser. Try it this way first:- hyundai.png If the locks and door triggers don't work go to the section above Downloads/Manuals and enter 2019 Hyundai Elantra that will show you how to hardwire it.

see the below images,

Cut that green wire short, not used in this application all other photos correct.

Just a thought, if your car was made in Turkey for the European market it WILL have an immobiliser. If it is a US market car then no. Easy way to tell. If US your speedo will be in miles, if Euro kilometres. Also your running lights will be amber if US. If European white front, red back and amber indicators. European cars have a resat fog light, US do not.

Good what about the other green wire, should i cut it too ???

made in korea

Kilometres or MPH? Just cut the long loose wire, NOT the loop.

howie ll wrote: Kilometres or MPH? Just cut the long loose wire, NOT the loop.

Kilometres

Euro spec unless a direct import, bet you have an immobiliser the. Remove cowling from steering column to show a picture of the ignition switch please.