ADM 200sx S14a Factory Door unlock and locking

Home / the12volt's Install Bay / Car Security and Convenience / ADM 200sx S14a Factory Door unlock and locking

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 07, 2015 at 6:39 AM / IP Logged

Forget the switch it's the diagram I posted.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 07, 2015 at 6:43 AM / IP Logged

Electronically there's no difference use the fourth if you prefer. Unlike the diagram, you will need to diode 1N4004 across the coil, band to 86 when it's the POS (+) side.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 07, 2015 at 7:34 AM / IP Logged

No 4 is incorrect, use 3 because the "switch" is your lock module, here's the corrected version. My way will keep your OEM remote working:-

add_5_wire.png

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.