Pioneer DEH-X2850UI Sub/Rear pre-amp out

Home / the12volt's Install Bay / Car Audio / Pioneer DEH-X2850UI Sub/Rear pre-amp out

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kurtb

Member - Posts: 2

Joined: November 16, 2015

Location: New Zealand

Posted: November 16, 2015 at 3:12 AM / IP Logged

Hi all,

I have just installed a new 4 channel amp (Sony XM-GTX6041). Front speakers work as they should. Rear speakers have little/no power. They make some noise when the head unit has 'sub' switched to 'on' in settings. They only play low frequency noise in this setting, and have some quiet static. Is there some way to change the head unit to rear, rather than sub. I can't find anything in the settings.

Cheers

Back to Top

kurtb

Member - Posts: 2

Joined: November 16, 2015

Location: New Zealand

Posted: November 16, 2015 at 3:49 AM / IP Logged

Pays to read the manual fully. Have answered my own question. You can change to rear only.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.