67 camaro, Compustar

yes sir it is GREEN / WHITE (+) output DEI GUY, man I just bought a brand new in box viper 5902v alarm/start combo I was gonna put in the car and the remote charges with wall power but as soon as you disconnect it from the wall there is nothing on the display of the remote it is the 7941v. It is the 2nd box with same problem from BESTBUY and now viper wants me to mail it back at my expense to the USA office from Canada. That is not right man Viper warranty sucks just my 0.02 cens

tekin wrote: DEI GUY, man I just bought a brand new in box viper 5902v alarm/start combo I was gonna put in the car and the remote charges with wall power but as soon as you disconnect it from the wall there is nothing on the display of the remote it is the 7941v. It is the 2nd box with same problem from BESTBUY and now viper wants me to mail it back at my expense to the USA office from Canada. That is not right man Viper warranty sucks just my 0.02 cens

Whoa there big guy. When I said "I'm a DEI guy" I meant that's the product I'm familiar with because that's the make of gear I use. I'm not a DEI employee. Your post is directed at me as though I WORK FOR DEI. I DON'T. And if I did, I still wouldn't appreciate that post in that tone because I was voluntarily helping you as an individual WITH A NON-DEI PRODUCT no less. DEI's policy regarding their warranty is well established: If one of their Dealers doesn't install it, it has no warranty. Seems clear to me. Your beef is with BestBuy. Not DEI, and CERTAINLY not with ME! I didn't appreciate that at all. Hope someone else helps you out with any future questions. I'm done.

dude I was not being mean or disrespectful to you, no I did not mean any BAD you helped and are helping others on this forum, man sorry if I came across the wrong way

I wanna add --a trunk light but there is no switch in the trunk but I did add a trunk pin switch to the alarm, can I use that, if so how do I wire it and do I need a relay??? --I have a interior dome light and the light comes on when the door opens but it shows a neg trigger and I want to add a courtesy light under the dash for the foot well how do I wire a new bulb socket there???

I have two questions:; --I wanna wire a light to the foot well of my car but the wire is POS+ just wondering how to do this?? --I want to add a light to the trunk when I open the trunk and would like to use my trunk pin(connected to the alarm) as a switch to open and close the light, any diagrams for relays or resistors???? not sure why my other post was deleted as my subject line got cut off

Also the 5902 hasn't been "brand new" for 3 years at least. Trunk pin switch to ground, wire to one side of light, other side to 12V+ constant. Wire a foot well light in parallel with your dome light.

Thank you very much in 5hought I might have to add a relay for the dome light side but, when I connect test light to the wire hooked to ground and prob the wire there is nothing when door is open when I. Close the door test light turns on

Are you talking about the door or trunk?

that is for the door switch I was gonna use to add light sockets to the footwells

in the trunk I wanna use the trunk pin switch and in the inside of the car I want to use the stock door pin