Momentary switch with relay?

Home / the12volt's Install Bay / Relays / Momentary switch with relay?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jerrad

Member - Posts: 1

Joined: December 04, 2015

Location: Texas, United States

Posted: December 04, 2015 at 1:40 PM / IP Logged

Good afternoon everyone,

I'm installing an electric exhaust cut out and I'm trying to wire in a different on/off/on momentary switch. People are saying that I need to use 2 5 pin relays to accomplish this, they also suggest that I use the "universal reverse on ground". Here is a schematic that I've found: http://honda-tech.com/attachments/audio-security-video-27/271136-help-installing-remote-start-alarm-keyless-entry-actuatorrevpol.gif

Here is the motor that I'm trying to control: http://m.summitracing.com/parts/qtp-qtec30cp?seid=srese1&gclid=CJf79M76wskCFRCqaQodDicPyQ

Any help would be greatly appreciated.

Jerrad

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.