installing Viper 5906v to Ford Mustang 2005

Hello everybody Chris from Norway here Am now a proud owner of a Ford Mustang 2005 V8 AT, i looking forward peoples insights and ideas. I just bought myself a viper car alarm 5906V and i took it to an professional installer here at my local place, it was said they we're the best in town among acquaintance of mine. The alarm installers told me that the Ford Mustang was a rare type of car and also they didn't know anything about the viper system so they wouldn't take time try to install it or look into it so they send me off. (pufff.... professionals... as if) Am a bit green in car alarms but i do know basic electronics and wiring, where ignition and kick panel fuse (SJB). Since i have to install this by myself i would appreciate any input or ideas where the wiring goes where and what i should get or what extra accessories i can install to the system. Ohh by the way i also bought the viper voice Module 516L. If i'am totally off, please comment and correct me so that i can correct it here. Also wish for window roll down feature if possible. Main Harness, 6 pin Connector 1 RED: light GREEN/ purple IGNITION 2 BLACK: Ground it in any bare metal. 3 BROWN: green SJB (grey 52pin) 4 WHITE/ BROWN: ? (any ideas) 5 WHITE: light GREEN/ black SJB (blue 52pin) 6 ORANGE: ? (any ideas) Door Lock, 3-pin Connector 1 BLUE: dark blue/green SJB (black 26pin) 2 N/A 3 GREEN: WHITE/ violet SJB (black 26pin) Remote Start, 10-pin Heavy Gauge Connector 1 NC: No Connection 2 RED / BLACK: ? (any ideas) 3 PINK/BLACK: ? (any ideas) 4 PINK/WHITE: ? (any ideas) 5 RED: RED / green IGNITION 6 GREEN: green (key side after cut) IGNITION 7 VIOLET: green (starter side after cut) IGNITION 8 ORANGE: BLACK/ pink IGNITION 9 RED / WHITE: ? (any ideas) 10 PINK: WHITE/ yellow IGNITION Auxiliary/shutdown/trigger Harness, 24-pin Connector 1 PINK/WHITE: ? (any ideas) 2 BLUE/WHITE: ? (any ideas) 3 RED / WHITE: WHITE/ purple SJB (black 52pin) 4 BLACK / YELLOW: light GREEN/ YELLOW SJB (grey 26pin) 5 DARK BLUE: ? (any ideas) 6 WHITE/ BLACK: ? (any ideas) 7 WHITE/ VIOLET: ? (any ideas) 8 ORANGE / BLACK: ? (any ideas) 9 GRAY: PURPLE / orange SJB (black 52pin) 10 BLUE: WHITE/ yellow SJB (black 26pin) 11 WHITE/ BLUE: ? (any ideas) 12 VIOLET/WHITE: ? (any ideas) 13 BLACK/ WHITE: ground it to bare metal since i have AT 14 GREEN/ BLACK: light blue/black SJB (black 26pin) 15 GREEN: WHITE/ purple SJB (black 26pin) 16 BROWN / BLACK: dark blue SJB (blue 52pin) 17 PINK: ? (any ideas) 18 VIOLET: GREEN/ YELLOW SJB (grey 26pin) 19 VIOLET/BLACK: ? (any ideas) 20 BROWN: ? (any ideas) 21 VIOLET / YELLOW: ? (any ideas) 22 GRAY/BLACK: N/A since the car isn't Diesel 23 ORANGE: ? (any ideas) 24 GREEN / WHITE: light blue/pink SJB (black 26pin)

Bypass module needed for Immobilizer! Main Harness, 6 pin Connector 1 RED: light GREEN/ purple IGNITION 2 BLACK: Ground it in any bare metal. 3 BROWN: green SJB (grey 52pin) 4 WHITE/ BROWN: ? (any ideas) 5 WHITE: light GREEN/ black SJB (blue 52pin) 6 ORANGE: ? (any ideas) Ground when armed for voice module Door Lock, 3-pin Connector 1 BLUE: dark blue/green SJB (black 26pin) 2 N/A 3 GREEN: WHITE/ violet SJB (black 26pin) Remote Start, 10-pin Heavy Gauge Connector 1 NC: No Connection 2 RED / BLACK: ? (any ideas) RED / green IGNITION 3 PINK/BLACK: ? (any ideas) N\A 4 PINK/WHITE: ? (any ideas) N\A 5 RED: RED / green IGNITION 6 GREEN: green (key side after cut) IGNITION 7 VIOLET: green (starter side after cut) IGNITION 8 ORANGE: BLACK/ pink IGNITION 9 RED / WHITE: ? (any ideas) N/A 10 PINK: WHITE/ yellow IGNITION Auxiliary/shutdown/trigger Harness, 24-pin Connector 1 PINK/WHITE: ? (any ideas) N/A 2 BLUE/WHITE: ? (any ideas) 3 RED / WHITE: WHITE/ purple SJB (black 52pin) 4 BLACK / YELLOW: light GREEN/ YELLOW SJB (grey 26pin) 5 DARK BLUE: ? (any ideas) For hardwired bypass. 6 WHITE/ BLACK: ? (any ideas) 7 WHITE/ VIOLET: ? (any ideas) Window module 8 ORANGE / BLACK: ? (any ideas) 9 GRAY: PURPLE / orange SJB (black 52pin) 10 BLUE: WHITE/ yellow SJB (black 26pin) 11 WHITE/ BLUE: ? (any ideas) Can be used to activate remote start. 12 VIOLET/WHITE: ? (any ideas) Tach wire NOT red ac any ignition coil or fuel injector. (N/A for virtual tach) 13 BLACK/ WHITE: ground it to bare metal since i have AT 14 GREEN/ BLACK: light blue/black SJB (black 26pin) 15 GREEN: WHITE/ purple SJB (black 26pin) 16 BROWN / BLACK: dark blue SJB (blue 52pin) 17 PINK: ? (any ideas) 18 VIOLET: GREEN/ YELLOW SJB (grey 26pin) 19 VIOLET/BLACK: ? (any ideas) 20 BROWN: ? (any ideas) Brake Wire lt. green +     sw. or SJB, gry 36 pin plug, pin 16 21 VIOLET / YELLOW: ? (any ideas) 22 GRAY/BLACK: N/A since the car isn't Diesel 23 ORANGE: ? (any ideas) 24 GREEN / WHITE: light blue/pink SJB (black 26pin)

Thank you for your input

Your welcome. Any other specific questions feel free to ask. Will help anyway I can.

Well i was wondering what you mean by Hardwire bypass at #5 24-pin connector. Also which wire do you recommend tapping in for the #12 Tach Wire and the location?

#5 24 pin if not using D2D connection for remote start/immobilizer bypass turn on. #12 Not needed if you use virtual tach, otherwise if you want over rev remote start shutdown you have to use this wire to any wire NOT red (ac volatge) any ignition coil or fuel injector. Then follow instructions for tach. learn.

Found in the vehicle Wiring section. Ford Mustang 2005 Wiring

Hi wolf47 I just purchased the same alarm and want to install it in my 2005 mustang and I don't know where to start can you share with me how you installed yours.