Audi A3 B&O sub replacement

Home / the12volt's Install Bay / Car Audio / Audi A3 B&O sub replacement

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

james cole

Member - Posts: 2

Joined: December 05, 2016

Location: Alberta, Canada

Posted: December 05, 2016 at 10:37 PM / IP Logged

Hello

Wanted some input on this matter...

My oem B&O subwoofer lacks depth, its mounted on the rear shelf free air...

Specs are DVC 8ohm each x 100w

I would like to replace it but there are no 8ohm dvc subs in 8 inch free air that I can purchase...

So I was thinking replacing it with a 4ohm dvc which there are... could this be a problem for the amp? The rest of the speakers (15 mids and tweeters) are all 4ohm...

What do you guys think?

JC

Back to Top

james cole

Member - Posts: 2

Joined: December 05, 2016

Location: Alberta, Canada

Posted: December 07, 2016 at 2:30 PM / IP Logged

bump!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.