single wire door lock problem

Home / the12volt's Install Bay / General Discussion / single wire door lock problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hb_sauce

Member - Posts: 4

Joined: May 02, 2003

Posted: May 30, 2003 at 9:32 PM / IP Logged

i have a 2003 hyundai tiburon and the doors operate on a single wire system. (-) lock , (-) unlock

and im installing it to a new compu star system and it has 2 options for the door lock signal sent from the brain (-)lock,(+)unlock and also (+)lock, (-) unlock

please help me i can get the car to lock but not to unlock, so if you have a relay wiring diagram or can explain to me how to get the keyless entry working

it would be appreciated

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 31, 2003 at 8:00 PM / IP Logged

this is the info that i have:

Door Locks Require Ground For Unlock,Ground Thru 1K Ohm Resistor For Lock.:

http://www.wiringinstructions.com/217.htm

let me know what you find out.....

take the neg wires for the door locks and add the parts listed above...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

Jeffqb11

Member - Posts: 3

Joined: May 25, 2003

Location: United States

Posted: June 03, 2003 at 8:06 PM / IP Logged

Hey I had the same problem with my compustar 2wssas and I took it back to the dealer and asked them about it and they had to send it back to compustar and now I am waiting on my new brain to get here. You may want to call compustar and find out if your problem is the same as mine and get a new one.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

single wire door lock problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.