Got the right manual and corrected my install sheet. Just to be clear, the starter wire doesn't need to be severed for this install. Also, I've read that a Keyless Entry Data wire might be found in the Factory Alarm harness. Can anyone confirm is this is the case and what color the wire might be.
Here is my new connection sheet. Any feedback would be greatly appreciated.
Vehicle Information: 2007 Honda Element EX AWD Automatic
Alarm / Remote Start Unit: Viper 4806V
Bypass Unit: Autostart DBALL2 Unit - Flashed Honda4 Type 3 Installation
Wirring Connection DBALL2
Installation Type 3
Hardware Harness Vehicle Location
DBALL2 - 12Pin Red Connector
Pin11 - ORANGE / Black - Immobiliser Data Pin02 Keysense Data - RED / White - Green 07pin Immobilizer Connector @ Ignition (Or Factory Alarm)
Pin10 - Door Lock Data - Yellow Black Pin02 Keyless Entry Data - Blue/Orange - Green 17pin Connector @ Back of Fuse/Relay Box
Pinout remaining and unused wires
DBALL2 - 14Pin Blue Connector
Pin14 - Black (-) Ground (-) CHASSIS GROUND
Pin13 - Red (+)12v (+)12VDC CONSTANT INPUT - White (50A) - Ignition Switch Harness
Pin11 - Yellow/Red - Security Light Pin 5 - CUT KeySide - ?Color?- Green 7pin Immobilizer Connector
Pin10 - Orange Red - Security Light Pin 5 - CUT WireSide ?Color?- Green 7pin Immobilizer Connector
Pin09 - Orange / YELLOW - Alarm interrupt NOT USED NO FACTORY ALARM
Pin08 - Yellow - Alarm interrupt NOT USED NO FACTORY ALARM
Pinout remaining and unused wires
DBALL2 - 10Pin Black Connector
Pin10 - Blue/White - (-) GWR (Status) Input NOT USED When D2D Connection
Pin09 - Pink (+) Ignition Input (+) Ignition Input - BLACK / YELLOW - Ignition Switch Harness
Pin03 - RED / White (-) Trunk input NOT USED When D2D Connection
Pin02 - Blue (-) Unlock Input NOT USED When D2D Connection
Pin01 - Green (-) Lock Input NOT USED When D2D Connection
Pinout remaining and unused wires
DBALL2 - 04Pin White Connector
D2D Connection to Remote Starter/Alarm
Wirring Connections Viper 4806V
VIPER 4806V - 06 Pin White Main Connector
PIN01 - Red - (+)12VDC CONSTANT INPUT (+)12VDC CONSTANT INPUT - White (50A) - Ignition Switch Harness
PIN02 - Black - (-) CHASSIS GROUND (-) CHASSIS GROUND
PIN03 - Brown - (+) SIREN OUTPUT (+) SIREN OUTPUT
PIN04 - WHITE/ Brown - PARKING LIGHT ISOLATION WIRE NOT USED - PINOUT WIRE
PIN05 - White - PARKING LIGHT OUTPUT- #30 COMMON of onboard relay (-) Blue - factory Alarm Harness Connector (Set Viper Fuse to Negative Trigger)
PIN06 - Orange - (-) 500mA (GWA) GROUND WHEN ARMED OUTPUT NOT USED - PINOUT WIRE
VIPER 4806V - 24 Pin White AUX/Shutdown/Trigger Connector
Pin01 - Pink/White - (-) 200mA IGNITION 2/FLEX RELAY OUTPUT NOT USED - PINOUT WIRE
Pin02 - Blue/White - (-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT Keep Wire - Future wiring to rear defogger
Pin03 - RED / White - (-) 200mA TRUNK RELEASE OUTPUT NOT USED When D2D Connection - PINOUT WIRE
Pin04 - BLACK / YELLOW - (-)200mA DOME LIGHT OUT NOT USED - PINOUT WIRE
Pin05 - Dark Blue - (-) 200mA STATUS OUTPUT NOT USED - PINOUT WIRE
Pin06 - WHITE/ Black - (-) 200mA AUX 3 OUTPUT NOT USED - PINOUT WIRE
Pin07 - WHITE/ Violet - (-) 200mA AUX 1 OUTPUT FUTURE USE KEEP WIRE
Pin08 - ORANGE / Black - (-) 200mA AUX 4 OUTPUT NOT USED - PINOUT WIRE
Pin09 - Gray - (-) HOOD PIN INPUT (N/O OR N/C) Not sure if needed with DBALL2 D2D - Otherwise install hoodpin
Pin10 - Blue* - (+) or (-) FACTORY HORN INPUT (Use Jumper to set polarity) (-) Orange HORN WIRE @ Steering Column
Pin11 - WHITE/ Blue - REMOTE START ACTIVATION INPUT NOT USED - PINOUT WIRE
Pin12 - Violet/White - Tachometer Input Green Wire @ Instrument Cluster
Pin13 - BLACK/ White - (-) NEUTRAL SAFETY /PARKING BRAKE/E-BRAKE INPUT (-) CHASSIS GROUND (Automatic Transmission)
Pin14 - GREEN/ Black - (-) 200mA FACTORY ALARM DISARM OUTPUT NOT USED - PINOUT WIRE
Pin15 - Green - (-) DOOR INPUT (N/O OR N/C) NOT USED When D2D Connection - PINOUT WIRE
Pin16 - EMPTY NOT USED
Pin17 - Pink - (-) 200mA IGNITION 1 OUTPUT NOT USED - PINOUT WIRE
Pin18 - Violet - (+) DOOR INPUT NOT USED When D2D Connection - PINOUT WIRE
Pin19 - Violet/Black - (-) 200mA AUX 2 OUTPUT NOT USED - PINOUT WIRE
Pin20 - Brown - (+) BRAKE SHUTDOWN INPUT (+) WHITE/ Black @ Brake Pedal Switch
Pin21 - Violet / YELLOW - (-) 200mA STARTER OUTPUT NOT USED - PINOUT WIRE
Pin22 - Gray/Black - (-) DIESEL WAIT TO START INPUT NOT USED - PINOUT WIRE
Pin23 - Orange - (-) 200mA ACCESSORY OUTPUT NOT USED - PINOUT WIRE
Pin24 - GREEN / WHITE (-) 200mA FACTORY ALARM ARM OUTPUT NOT USED When D2D Connection - PINOUT WIRE
VIPER 4806V - 8 Pin White Remote Start Heavy Gauge Connector
Pin01 - RED / Black - (+) FUSED 12V ACCESSORY/STARTER INPUT (+)12VDC CONSTANT INPUT - White (50A) - Ignition Switch Harness
Pin02 - Pink/Black - (+) FLEX RELAY INPUT #87a key side (if required) of FLEX RELAY NOT USED - PINOUT WIRE
Pin03 - Pink/White - (+) IGNITION 2 / FLEX RELAY OUTPUT #30 of FLEX RELAY (+) RED / White @Ignition Harness
Pin04 - Red - (+) FUSED 12V IGNITION 1 INPUT (+) BLACK / YELLOW @ Ignition Harness
Pin05 - Violet - (+) STARTER OUTPUT (+) BLACK/ White @ Ignition Harness
Pin06 - Orange - (+) ACCESSORY OUTPUT (+) BLACK/ Red @Ignition Harness
Pin07 - RED / White - (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87 (+) White @ Ignition Harness
Pin08 - Pink - (+) IGNITION 1 INPUT/OUTPUT (+) BLACK / YELLOW @ Ignition Harness
VIPER 4806V - 3 Pin DoorLock Connector
Pin01 - NOT USED When D2D Connection - PINOUT WIRE NOT USED When D2D Connection - PINOUT WIRE
Pin02 - NOT USED When D2D Connection - PINOUT WIRE NOT USED When D2D Connection - PINOUT WIRE
Pin03 - NOT USED When D2D Connection - PINOUT WIRE NOT USED When D2D Connection - PINOUT WIRE
VIPER 4806V - 4 Red D2D Connector
CONNECT TO DBALL2 UNIT CONNECT TO DBALL2 UNIT