Viper 5000-series security & remote start system

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5000-series security & remote start system

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nomaxtech

Member - Posts: 10

Joined: January 05, 2010

Location: Michigan, United States

Posted: February 04, 2017 at 4:47 PM / IP Logged

Why are there 3 different High Current 12v Input wires on the harness for the Heave Gauge Relay Satellite? They are Red, Red, and RED / White. Do all three of these have to be connected to the single heavy gauge 12v constant wire in the ignition harness? Should I run brand new 10-gauge wires directly from the battery to plug these into?

Second, the wiring diagram for my 2012 Honda CRV says I have two accessory/blower motors. Should I use H/4 Orange and H/8 Pink/White for these?

http://www.commandocaralarms.com/wiring/2012-/Honda/Crv/955.html

http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.