2016 suburban neutral safety switch

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2016 suburban neutral safety switch

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cfr45

Member - Posts: 1

Joined: August 05, 2016

Posted: February 22, 2017 at 4:40 PM / IP Logged

I trying to drive a relay while my 2016 chevy suburban is in drive so I am looking for either the neutral safety switch to shut off the circuit while in park and neutral or a circuit to turn on the relay while in drive preferably something at the bcm if possible.

Back to Top

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: February 22, 2017 at 7:47 PM / IP Logged

https://www.gmupfitter.com/files/media/photo/629/Escalade_Escalade_ESV_Suburban_Tahoe_Yukon_Yukon_XL_Electrical_Body_Builders_Manual_Service_Manual_2016_en_US.pdf

Page 134: Circuit 1786, WHITE/ Grey Wire. Wire is at Engine Control Module. L96 (6.0L) X1, Pin 34 or L83/L86 (5.3L/6.2L) X2, Pin 58. It is a negative input to the ECM.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.