DEI 530T window issues, 01 Silverado

Home / the12volt's Install Bay / Car Security and Convenience / DEI 530T window issues, 01 Silverado

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: February 25, 2017 at 9:40 AM / IP Logged

Hey all-

Today my passenger side window wouldn't roll down on my 01 silverado, switch clicks but no movement. Ever since I had the dei 530 window modules installed the window sticks and goes slow. Alreaafy been back to the shop 1 time for same issue (years ago as I barely drive it). They lubed tracks and hooked up a cable to battery for more power. Still went slow and stuck, just delt with it.

Not sure if a fuse on 530 could cause window function to stop or if regulator/motor. Is install for these 530s cut wire and hardwire straight to window motors? Worse case sounds like soldering a 3-4 stock wires per side?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.