Compustar GWR

Home / the12volt's Install Bay / Car Security and Convenience / Compustar GWR

Welcome Guest :)

Members

< Prev Topic Next Topic >

lilancer

Member - Posts: 22

Joined: June 06, 2004

Location: United States

Posted: October 20, 2018 at 6:49 PM / IP Logged

Hello,

I have a 2018 Silverado 1500 with a compustar FT-DC2-S remote start and security. The issue I’m having is at night when I disarm the system when the remote start is active the HID headlights flash. My question is can I use the ground when running to the parking lights to stop this? If I can do this do I need to place a diode in-line so when the lights are on at night it don’t back feed to the GWR? Any advice would be greatly appreciated.

mgoetz74

Silver - Posts: 424

This member consistently provides reliable information

Joined: February 15, 2012

Location: United States

Posted: October 24, 2018 at 2:50 PM / IP Logged

The white with black dots on the m2 harness should be going to the lt.Green/grey at the head light switch. Maybe better than going to the bcm

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.