2010 Ford Fusion, iDataStart 3.5/HCA320

Home / the12volt's Install Bay / Car Security and Convenience / 2010 Ford Fusion, iDataStart 3.5/HCA320

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: June 11, 2023 at 5:46 PM / IP Logged

Do you get the Parking Lights with a R/S?

The Parking Lights should work fine using that Purple/White wire at the BCM Gray 13 Pin connector. Use your DMM to verify that wire and then the +12V relay output. The White/Black (-) Parking Light Output wire is not a POC so no issues there. You could test it with a DMM to check for it's (-) output during R/S runtime and

with the lock commands.

As far as options that affect this, check :

1-20 should be set to F02 (default).

2-17 should be set to F02 (default).

Soldering is fun!

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.