Viper 5806v Remote Start Issues MTS +

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5806v Remote Start Issues MTS +

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

itolond

Copper - Posts: 87

Joined: February 13, 2016

Location: Singapore

Posted: August 27, 2023 at 4:50 PM / IP Logged

Hi

all,

Have a viper 5806v - A few issues

Remote start - follow the remote start procedure for a Manual - Everything is good (the remote shows remote start ready) Then at the step where you turn ignition off and remove the key the engine shuts off where it should stay running - any ideas where to look

also not getting cabin lights when disarmed?

Back to Top

itolond

Copper - Posts: 87

Joined: February 13, 2016

Location: Singapore

Posted: August 27, 2023 at 10:00 PM / IP Logged

Hi all

5806v in manual transmission remote start issues

all good until I turn the ignition key off - the engine runs for a while, then shuts down - on the remote I get a "remote start off" notification and from the vehicle an audible "valet engine shutdown" message

from what I can tell it isn't at all in any valet mode - little lost

Back to Top

silvercivicsir

Copper - Posts: 403

Joined: November 21, 2003

Posted: September 11, 2023 at 3:57 PM / IP Logged

did you ever get this resolved? what kind of car is it? do the park lights flash when you put it in ready mode?

Back to Top

Search for other posts by silvercivicsir

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.