Slowest Two Prong LED Flasher?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Slowest Two Prong LED Flasher?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

carguy8888

Member - Posts: 7

Joined: January 29, 2022

Location: New York, United States

Posted: September 26, 2023 at 9:43 AM / IP Logged

I'm trying to slow down the sequential hyperflash turn signals on the back of my '99 Trans Am. After trying a few inexpensive adjustable flashers from Amazon they're all still too fast. Can anyone suggest something? I can post the link with a video if anybody is interested? Thank you.

Back to Top

Custom_Jim

Copper - Posts: 210

Joined: November 28, 2003

Location: Missouri, United States

Posted: October 11, 2023 at 11:33 AM / IP Logged

They used to sell the clay type of resistors that wired between the factory turn signal wire and ground to have an LED style bulb work with a standard flasher so I wonder, could this setup work ?. A standard flasher and the proper sized/wattage resistors ?. Looks like now the resistors are in aluminum heatsinks ?. Slowest Two Prong LED Flasher? -- posted image.

Slowest Two Prong LED Flasher? -- posted image.

1968 Chevy II Nova Garage Find 2012

1973 Nova Custom

1974 Spirit of America Nova

1973 Nova Pro-Street

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.