Seat Heater Wiring, 2020 Chrysler Voyager

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Seat Heater Wiring, 2020 Chrysler Voyager

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

install_this

Member - Posts: 1

Joined: October 11, 2023

Location: Wisconsin, United States

Posted: October 11, 2023 at 10:24 AM / IP Logged

Installing seat heaters into a 2020 chrysler voyager mini van and any install I have done I have always been able to get switched power at the cigarette lighter however on this vehicle it is constant. I believe I need to use a relay to trigger this output, what is the proper pinout for a 5 pole relay to do this?

I believe I would need a switched 12v trigger

12v constant

output to the seat heaters

not sure what else or what the pinout would be. And in regards to the 12v trigger, does ANY 12v switched source work or? I do not want to overload the circuit obviously.

Thanks for your help!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.