Astrostart 2514TX Fob Failure

Home / the12volt's Install Bay / Car Security and Convenience / Astrostart 2514TX Fob Failure

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

controlfreak

Member - Posts: 3

Joined: November 17, 2002

Posted: January 17, 2024 at 3:37 PM / IP Logged

I keep having to replace my 2514 tx fobs after either low battery or if I just change batteries. After the battery change the remote wil just do the single slow beep and nothing I can do will change it. A new remote fob works fine until I have to change batteries. The remote unit works fine and I can always pair a new fob. Ideas please? Thanks

Back to Top

silvercivicsir

Copper - Posts: 403

Joined: November 21, 2003

Posted: January 18, 2024 at 11:06 AM / IP Logged

you are putting in 2 X CR2016 batteries? and not a single CR2032?

Back to Top

Search for other posts by silvercivicsir

controlfreak

Member - Posts: 3

Joined: November 17, 2002

Posted: January 18, 2024 at 11:36 AM / IP Logged

Correct. I also measure the voltage of each new battery before I put them in.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.