nstalling 2ed alternator drawing 460amps

Home / the12volt's Install Bay / Car Audio / nstalling 2ed alternator drawing 460amps (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Bigsky

Member - Posts: 2

Joined: June 11, 2003

Location: United States

Posted: June 11, 2003 at 10:22 PM / IP Logged

I am installing a 5 amp system that could draw over 460 amps of current and I know I will need to upgrade my charging system. I need to know are there any do's and don'ts I should watch-out for? Is the best way to run a second alternator is to directly wire it to the 3 Yellow Tops that will be installed one for each amp that is driving @ 1600 Watts RMS bridged into 4 Ohms? Will I need more than a battery isolater? I will be using 3 DiamondAudio D7402's @ 1600 Watts each bridged into 4 Ohms, 1 D7056 @ 200 Watts X 3 Bridged into 4 Ohms, and 1 D7402 @ 200 Watts X 2 Bridged into 4 Ohms. All this into a 96 Maxima. Any Ideas?

Back to Top

Okoboji

Member - Posts: 35

Joined: May 31, 2003

Location: United States

Posted: June 12, 2003 at 5:53 PM / IP Logged

you need to buy a hummer you can put 2nd alternator on the belt system.... but i dont think theres enough horsepower in your engine to produce 460 amps!!!!!

Back to Top

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: June 12, 2003 at 6:01 PM / IP Logged

You are obviously going to need at least two alternators--maybe even three. Depending on what kind of vehicle/engine you have, this may or may not be possible.

Also remember when you're looking at HO alternators to look at the power output at idle and use that spec. to compare too. A "200A alternator" is only gonna produce that amount when you're at higher RPMs. So if you intend to slam your system when you're at a stop light you better make sure your alternators put out plenty of power at engine idle speed.

I saw this place recommended by a number of Web sites so you might wanna check it out. Also I think Big Purds has a hookup somewhere for discounted HO alternators so u might wanna get in touch with him too.... nstalling 2ed alternator drawing 460amps -- posted image.

Ethan

-----

"Patience, persistence, and perspiration make an unbeatable combination for success"

Donate to the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

nstalling 2ed alternator drawing 460amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.