need help with viper 300esp

i have a 2000 impala and am installing a viper system .I have all installed (i think)except the door locks .Can someone let me know what wires are lock and unlock feed wires i cant find them anywhere??????I found a orange with black tracer wire that when i ground unlocks the doors but i cant find the wire to lock the dorrs .HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1bbaddbrad

|       POWER LOCK|ORANGE / black        |*2 |gray 24-pin plug @ BCM *3   | |     POWER UNLOCK|same wire as lock   |- |gray 24-pin plug @ BCM *3   | | PARKING LIGHTS -|white *8            |   |pink 24-pin plug @ BCM *3   | *3 The BCM is located above the brake pedal. It is a plastic box with three plugs that face the firewall. *8 Must isolate this wire from the BCM when doing remote start to avoid 'service engine soon' light. See directfax document #1600 for wiring information.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

thank you. i had put a 490 ohm resistor in the green wire of the alarm to the orange w/blk traced wire and my doors lock but now when i also hook up the blue wire of alarm up to the same orange wire nothin .it is backfeeding and i dont know how to stop it?????bbaddbrad