advantguard 4 tach programming

Home / the12volt's Install Bay / Car Security and Convenience / advantguard 4 tach programming (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ryanambrose

Member - Posts: 3

Joined: July 29, 2003

Posted: August 03, 2003 at 8:08 AM / IP Logged

I can't get the tach from my '02 Chevy 2500 to program to my advantguard 4. There is no programming option in the feature chart in the manual. If anyone knows the column and row to program it, or if there is another way please tell me.

Thanks

wikkedkustoms

Member - Posts: 10

Joined: April 24, 2002

Posted: August 03, 2003 at 12:31 PM / IP Logged

It is an installer programmable feature only. What you have to do is this. Start the vehicle and let it idle. Enter your valet code on the switch (factory setting is press star twice and then blank. After doing this hold down the star button, after about 5 seconds the siren will chirp, continue to hold it until it chirps again which will be about 15 seconds. After it chirps release it. Then press the blank side and release wait for a chirp (this is very important) after you hear that confirmation chirp press the star side five times the siren will chirp each time to help you count. After the fifth time listen for the siren to chirp twice and the lights to flash twice. And now you're all set just turn the car off and enjoy autostart.

elrayodesinaloa

Copper - Posts: 120

Joined: April 28, 2003

Location: United States

Posted: August 04, 2003 at 6:32 PM / IP Logged

right, and if don't you've got a wrong tach wire.

Search for other posts by elrayodesinaloa

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

advantguard 4 tach programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.