Box volume for Crystal CMPx2 15's

Home / the12volt's Install Bay / Car Audio / Box volume for Crystal CMPx2 15's (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

c0mpl3x

Member - Posts: 5

Joined: August 21, 2003

Location: United States

Posted: August 21, 2003 at 10:50 AM / IP Logged

I plan on running 2 Crystal CMPx2 15's off a JBL BP1200.1. Ok so here is the question. Crystal's sealed box dims call for 1.8 cf per chamber and the box im going to buy from subzone is only 1.5 so if i added some poly-fill would that be ok? I really dont feel like building a box so i just want to buy a box already built.

Back to Top

Big Purds

Silver - Posts: 574

Joined: November 25, 2002

Location: Canada

Posted: August 21, 2003 at 5:16 PM / IP Logged

well, they will be OK, just wont hit as hard in the lower frequencies...a smaller box will give u a bit of extra punch but cut off some of your bottom end response...if you dont want to build a box you really wont lose too much in the 1.5 per box...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Box volume for Crystal CMPx2 15's

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.