Remote Start installation

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start installation (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Nlzx

Member - Posts: 9

Joined: March 14, 2002

Location: United States

Posted: August 21, 2003 at 8:00 PM / IP Logged

I have a 91 ford explorer. I'm attempting to put a Crimestopper 2006FM remote start on it. I don't know how or where to connect the coil wire or the neutral safty switch. Any help you could provide would be much appreciated.

Back to Top

fordfan

Copper - Posts: 67

Joined: July 28, 2002

Location: United States

Posted: August 21, 2003 at 8:29 PM / IP Logged

TAN / YELLOW AT COIL ON 3.0L

OEM opens start circuit

Back to Top

dayzout

Member - Posts: 22

Joined: August 20, 2003

Location: United States

Posted: August 21, 2003 at 8:38 PM / IP Logged

for neutral safty . Just ground that wire I only use it when installing them on a 5 speed.

Back to Top

Nlzx

Member - Posts: 9

Joined: March 14, 2002

Location: United States

Posted: August 21, 2003 at 9:36 PM / IP Logged

I need to ground the tan / YELLOW wire? I have a 4.0L.. My problem is finding the wire and knowing what to do with it when I find it..

Back to Top

dayzout

Member - Posts: 22

Joined: August 20, 2003

Location: United States

Posted: August 21, 2003 at 9:55 PM / IP Logged

if that is what the neutral safty wire is on the alarm

Back to Top

samdub

Member - Posts: 41

Joined: April 22, 2003

Location: United States

Posted: August 21, 2003 at 10:05 PM / IP Logged

ground the neutral safety wire from the alarm

connect tach wire from alarm too the tan / YELLOW wire do not ground this wire this is the coil wire color that you should connect the tach wire too

you do not need neutral safety on this install

Back to Top

samdub

Member - Posts: 41

Joined: April 22, 2003

Location: United States

Posted: August 21, 2003 at 10:07 PM / IP Logged

if its an auto transmisson

Back to Top

Nlzx

Member - Posts: 9

Joined: March 14, 2002

Location: United States

Posted: August 21, 2003 at 11:03 PM / IP Logged

My alarm says it can opperate in tachless mode as long as tach wire is "connected to a valid source" does that mean I can just ground the tach wire on my unit and not have to worry about anything? I'm really sorry to be such a bother...

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: August 22, 2003 at 9:05 PM / IP Logged

Connect it to the tach wire. Remote starters very rarely work well if not hooked up to tach. Some times it will start, othertimes it won't.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start installation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.