Phonix Gold Ti1000.2

Home / the12volt's Install Bay / Car Audio / Phonix Gold Ti1000.2 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Lebult

Copper - Posts: 66

Joined: June 13, 2003

Location: Canada

Posted: August 27, 2003 at 1:09 PM / IP Logged

Hey guys,

I bought a Ti1000.2 rated at 1000 watts bridged at 4 ohms but its at 14.4 Volts.

Does anyone know have this amp, and knows the rating at 12 volts??

muzikmannn

Member - Posts: 3

Joined: August 18, 2003

Location: Canada

Posted: August 27, 2003 at 8:28 PM / IP Logged

833.33 watts

Remember when stepping on the gas peddle in your car your battery is putting out near 14.4 volts

Lebult

Copper - Posts: 66

Joined: June 13, 2003

Location: Canada

Posted: August 28, 2003 at 1:46 AM / IP Logged

Really???

Wow, I didnt know that.

That makes things a bit easier.

Thanks,

wizzle

Copper - Posts: 55

Joined: August 08, 2003

Location: Afghanistan

Posted: August 28, 2003 at 1:53 AM / IP Logged

acutally, stepping on the gas peddle does not produce 14.4 volts. it is a little more complicated than that. Usually, at higher RPM's, the alternator will provide more voltage. and most charging sytems have a hard time producing that amount of voltage, esp. with that type of wattage. it is not the battery that is putting out the voltage when your car is running, but rather the alternator. at that wattage, run a 1 farad capcaitor, and this will help keep a higher and more stable voltate. I know a full farad is slightly overkill for 800 watts, but a little buffer never hurts.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Phonix Gold Ti1000.2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.