Dual stage perimeter senson hookup

Home / the12volt's Install Bay / Car Security and Convenience / Dual stage perimeter senson hookup (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

grog117

Member - Posts: 8

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 01, 2003

Posted: September 03, 2003 at 7:48 PM / IP Logged

I have an Autopage rs750lcd and it has worked perfectly for over a year. I recently purchased a dual stage perimeter sensor and want to add it to my alarm. The problem is that my Autopage dosen't seem to have auxilliary inputs. Could I connect the dual stage peimeter sensor to my existing daul stage shock sensor using blocking diodes? If so how can I determine which wire to use for the pre-warning trigger and which for the alarm trigger? I am also planning to add a glass break sensor, can this be piggybacked (again using blocking diodes) with the pin switch trigger? The perimeter sensor has 12v+ trigger but I'm not sure about the shock sensor. Both have four wire hookup and I assume two of these are 12+ and 12v-

grog117

samdub

Member - Posts: 41

Joined: April 22, 2003

Location: United States

Posted: September 03, 2003 at 8:17 PM / IP Logged

grog what your wanting to do is very possible but the install can be very complicated to do correctly and not damage your equipment my suggestion would be to consult with a shop with a good installer they can put an eyeball on it and take the correct steps to install

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 03, 2003 at 10:39 PM / IP Logged

This will help you. The outputs are (-) trigger so you will not short anything out by attepting this yourself:

http://www.velocitymotorsport.com/images/install_notes/155.jpg

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

grog117

Member - Posts: 8

Joined: September 01, 2003

Posted: September 04, 2003 at 3:38 AM / IP Logged

Outstanding Velocity Motors, That's exactly what I was looking for. Does anyone know about piggybacking the glass break sensor to the pin switch? How would I connect the perimeter sensor to a window roll up module to roll up my windows on pre-warn?

grog117

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 04, 2003 at 9:20 AM / IP Logged

Why do you want to piggyback the glass break to the pin switch ? If you want to activate the window module with the 1st stage of the radar sensor, you will need a relay to isolate the sensor from the module and this will also act as a (-) signal booster because the activation signal of the radar signal would not be strong enough to activate a window roll up module. As well, you need to find a module that is pulse activated and not 6 second latched or constant. This is very important if you want this to work properly.

Use this diagram for the relay from the radar sensor to the window module's activation wire.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: September 05, 2003 at 9:07 AM / IP Logged

agreed

Or replace the factory shock sensor with a glass/shock sensor combo.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Dual stage perimeter senson hookup

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.