Factory alarm disarm

Home / the12volt's Install Bay / Car Security and Convenience / Factory alarm disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gatightlines

Member - Posts: 13

Joined: September 02, 2003

Location: United States

Posted: September 22, 2003 at 8:36 PM / IP Logged

2002 Dodge Ram Quad Cab

Got my system hook up and working fine except the factory disarm. I have now taken the factory arm wire and the factory disarm wire from the alarm off of the truck and the truck still arms the factory alarm. I am assuming that it is doing this through the door locks since the factory alarm comes on when you manually lock the door with the power switch.

Side note: I think the factory alarm has a delay like most alarms (30 sec) before it fully sets up. I can set the alarm and then disarm it within the 30 seconds and the installed alarm will turn the factory alarm on and off. Once the factory alarm fully sets up, the aftermarket alarm will not disarm the factory alarm. This is all happening without the factory alarm arm / disarm wires connected to the truck.

I have tried to connect the arm and disarm wire up per the trucks wiring codes with no sucess.

Back to Top

chuckles

Member - Posts: 39

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 11, 2003

Location: United States

Posted: September 25, 2003 at 7:27 PM / IP Logged

I had to remove the door panel and trace the wire directly from the door lock to the factory alarm, because what I was told was the disarm wire was not.

Chuck

Back to Top

gatightlines

Member - Posts: 13

Joined: September 02, 2003

Location: United States

Posted: September 25, 2003 at 8:34 PM / IP Logged

Actually I was told to do this and it worked.

factory alarm disarm: GREEN/ orange stripe in driver kick

Arm(-)thru a 2K ohm resistor---------- Disarm(-) thru a 480 ohm resistor----------

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Factory alarm disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.