bcm sleep mode/door triggers

Home / the12volt's Install Bay / Car Security and Convenience / bcm sleep mode/door triggers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ased

Member - Posts: 2

Joined: October 25, 2003

Location: Canada

Posted: October 26, 2003 at 2:45 PM / IP Logged

Hello all. I have had an autopage lcd 850 installed. Problem is that after the bcm goes to sleep mode, the signals on the door wire drop from +12 to 4, this the remote then indicates that a door is open, when it is not. Any way around this????

Thanks

Back to Top

GottaBNeat

Member - Posts: 35

Joined: October 21, 2003

Location: United States

Posted: October 26, 2003 at 3:22 PM / IP Logged

I don't know what type of car you are talking about but you can probably get away with using a diode to get the problem fixed. Are you using a positive or negative trigger? The diode will prevent the drop in voltage from showign when the bcm goes to sleep depending on the polarity of the door trigger.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: October 26, 2003 at 6:32 PM / IP Logged

What kind of vehicle? Year? Need to know these things.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

mecpcert_1

Copper - Posts: 83

Joined: October 24, 2003

Location: United States

Posted: October 27, 2003 at 12:06 AM / IP Logged

ymm....year/make/model, please.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bcm sleep mode/door triggers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.