stapling cloth to plastic

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / stapling cloth to plastic (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

pfitz

Copper - Posts: 53

Joined: May 10, 2003

Location: Canada

Posted: December 05, 2003 at 7:32 PM / IP Logged

I use spray adhesive(3M workes best for me). Sprey down the adhesive lightly, cover with tinfoil, spray adhesive the cloth and resin the cloth. after it cures the whole thing will peel off and a quiek wipe will clean the origional door of adhesive(just in case it was just to get the mold)

I like to make my own door skins with 1/8" hardboard than design from there?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

stapling cloth to plastic

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.