will ppi push 10's

Home / the12volt's Install Bay / Car Audio / will ppi push 10's (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

colaroaster

Copper - Posts: 53

Joined: May 17, 2003

Location: United States

Posted: November 12, 2003 at 11:07 PM / IP Logged

a friend of mine has 2 jl audio 10's, dvc 4 ohms. will the ppi a300(art series) push the 10's if the voice coils are wired in parallel? or will it damage the amp?

carloud

Member - Posts: 11

Joined: November 10, 2003

Location: United States

Posted: November 14, 2003 at 9:47 PM / IP Logged

I am guessing that the amp is a mono chanel at 300w. If that is correct then the subs will be under powered, unless they are w0's then it might work. I would suggest getting a bigger amp and possibly using that for some speakers or something...

www.carLOUD.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

will ppi push 10's

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.