how to connect 2 starter wires for Nissan

I know NISSAN MAXIMA 1999 have 2 starter wires, I want install remote car starter commando 5005 on it. May some one help me how to connect 2 starter wire by Relay? If some car have 2 accessory wire, which diagram of relay we can connect? Can some one send me a document # 1070 power unlock for Lexus RX 300? Thanks Anthony Nguyen

I already replied your second accessory wiring configuration. It's the same way to hook up Second Starter wiring. Good luck. Check your PM message.

I didn't say it's the same. I said the relay configuration is the same. Jeff, you and I know that those were different wires in the ignition harness. Second Starter wire for cold start only, if the vehicle is not hookup and it will not start in the winter. The Second Accessory wire required power throughout the remote start sequence for 10 min, 15 min, or 20 mins to run heater, or other accessory in the vehicle. He sent me a PM regarding second accessory wire. I PM him back the relay configuration diagram.

I always just jump the starter output from one starter wire to the other, no relays involved. True the wires are no longer isolated, but it hasn't caused a problem and some manufactures actually tell you to do it this way..Works for me..Now accessory wires I would NOT do that with..Those I keep seperate..Good luck, Mike

Thank you very much

Can some one send me a document # 1070 power unlock for Lexus RX 300?

Ehh..Look at it yourself: http://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf