crossover set on axis or off?

Home / the12volt's Install Bay / Car Audio / crossover set on axis or off? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

losboricua

Copper - Posts: 135

Joined: November 09, 2003

Location: Ohio, United States

Posted: December 30, 2003 at 12:41 AM / IP Logged

i keep hearin stuff about omponets cross over set on axis or off. can someone explain what that means ?? im dieing to learn. i install my componets (diamond audio m3) in my car about a month or so ago and i saw that lil jumper on my cross over and i just want to know if it right or wrong. it think they are off axis? is that right or wrong

thanks

carlos

2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered

Durwood

Copper - Posts: 126

Joined: November 30, 2003

Location: United States

Posted: December 30, 2003 at 1:30 AM / IP Logged

I'll double check, but I think the behaviour of the speakers can be optimized depending on which way they're facing. If the speakers point pretty much directly at the listeners, that would be "on-axis". If they don't point at the listeners, I would select "off-axis" to compensate for the placement of the speakers. This is more important for the tweeters than for the 5.25" speakers, obviously. Make your on-or off-axis determination based on where the tweeters are pointing.

Scott Gardner

losboricua

Copper - Posts: 135

Joined: November 09, 2003

Location: Ohio, United States

Posted: December 30, 2003 at 1:57 AM / IP Logged

i mounted my tweeters right nex to the door window where the door panel cover where the mirros are mount

2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 30, 2003 at 12:38 PM / IP Logged

you should be fine with on axis aet up for this vehicle

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

losboricua

Copper - Posts: 135

Joined: November 09, 2003

Location: Ohio, United States

Posted: December 30, 2003 at 2:33 PM / IP Logged

i think they or off but i will check i have to get the door panel off

2015 Hyundai Genesis Ultimate Black on Black

Tinted Windows, Fogs, Roof Spoiler, ARK Springs, Ruff R1 20's Staggered

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

crossover set on axis or off?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.