Valet 552T

Home / the12volt's Install Bay / Car Security and Convenience / Valet 552T (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

GregK

Copper - Posts: 74

Joined: December 30, 2003

Location: Manitoba, Canada

Posted: December 30, 2003 at 1:20 PM / IP Logged

Hi all,

My wife just purchased a 1993 Grand Am with the Valet 552T remote starter in it. The DEI site's manual for this model is not at all what we have in the car. My best guess is that the model we have is older.

Would anyone happen to have a copy of the manual for this older 552T? Electronic copy preferred. :-)

Thanks in advance.

Greg

bassop823

Copper - Posts: 64

Joined: December 15, 2003

Location: United States

Posted: January 02, 2004 at 10:06 PM / IP Logged

I beleive what you might have is a 551T. Have you pulledthe brain and seen what it says on it. Also how many harness does the brain have plugged into it?

bassop

GregK

Copper - Posts: 74

Joined: December 30, 2003

Location: Manitoba, Canada

Posted: January 02, 2004 at 10:23 PM / IP Logged

The brain says 552T on it, there are three harnesses, no jumpers, a bank of dip-switches inside with the status LED beside them and the antenna is hard wired into the brain.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Valet 552T

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.