01 navigator entry illumination

Home / the12volt's Install Bay / Car Security and Convenience / 01 navigator entry illumination (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hollywood183

Member - Posts: 3

Joined: January 05, 2004

Posted: January 05, 2004 at 11:37 AM / IP Logged

I am trying to figure out how to hook up my interior lights to the disarm feature of my alarm. It did it with the factory keyless entry. I am using an audiovox aps996 alarm. Any help is appreciated..Thanks

Dave

hollywood183

Member - Posts: 3

Joined: January 05, 2004

Posted: January 05, 2004 at 11:50 AM / IP Logged

Just another question from my original post. I see the diagram in the manual and I see what I have to do with the relay. In the relay, the alarm wire goes to 86 and 85 goes to a fused battery source. What is a fused battery source. then 87 goes to entry illumination wire of vehicle. Does anyone know what wire that is in an 01 Navigator. And then I see 87a and 30 go together to either a fused 12V source or a chassis ground. Does anyone know which one it would go to in the 01 Navigaor?

Thanks

Dave

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 05, 2004 at 4:54 PM / IP Logged

86 and 85 do not go to the same location.....a fused battery source is a 12v paower with a fuse in line

Dome Light BLACK/ L BLUE (+) 16 PIN CONN. IN PASS. KICK PANEL **

look to left of this post under illuminated entry and wire it up like that...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 navigator entry illumination

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.