2003 s10 remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2003 s10 remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: January 17, 2004 at 7:26 PM / IP Logged

Since it is a 2003, it is an OBD2 system and requires a scanner to reset the light.

If the problem has been repaired, the light will go out on its own after a number of restarts.

If there is an AutoZone near you, they can retrieve the trouble code and clear the codes for you.

Back to Top

plywood

Member - Posts: 34

Joined: July 31, 2003

Location: United States

Posted: January 19, 2004 at 9:46 AM / IP Logged

Disconnect the negitive batt. cable for about 30 minutes, that should clear any soft codes that would turn on the light.

Matt

Always remember to test wires with a Digital Multimeter!

Back to Top

joeseph0171

Member - Posts: 10

Joined: January 15, 2004

Location: United States

Posted: January 19, 2004 at 2:26 PM / IP Logged

well guys thanks for all the help. i think i finally got it. i had autozone reset my light last night. so far it hasnt came back on. when i redid the wires the other day, the 2nd ignition on the junk bulldog t-harness was loose. the part that actually goes into the harness, with the pin on it. go figure. if i have learned anything... dont get a bull dog system... they are complete junk.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 s10 remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.