Shock Sensor Interchangibility

I purchased a used vehicle that has from the info booklet in the glove box an Omega AL-100-H alarm and the shock sensor does not work, the sensitivity set screw just turns with no stop in either direction, I have tried contacting Omega for a replacement but they do not reposnd to emails or messages left, I have a shock sensor from a Crime Stopper CH2000 alarm and they appear to have the same harness connection but thought I would ask before trying and burning something up Thanks Bob

Bob, No problem using the CS shock sensor. But you will have to make sure that all the wires are connected to the appropiate colors, just in case they do not match the Omega unit. Depending upon which sensor style it will have the following colors: Red = Power +12 VDC constant Black = Ground (-) Blue = Trigger White = Prewarn Brown / White = Ground while armed Purple = Cut loop to reduce sensitivity Brown = To drive a positive (+) siren. Regards EVIL Teken . . .

Thanks, my shock sensors each have only 4 wires Bob

bob, if you need a shock sensor...drop your address. illsend you FREE! lol the colors are as follows: red 12v green-prewarn blue-trigger(-) black groundGood Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

David, I sent you a PM Thanks Bob