Aftermarket alarm disarm /w RS

Home / the12volt's Install Bay / Car Security and Convenience / Aftermarket alarm disarm /w RS (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tianlihu

Member - Posts: 34

Joined: October 08, 2003

Posted: February 07, 2004 at 12:47 AM / IP Logged

Does anyone know how to disarm the Aftermarket alarm when using remote starter to start the car (if there is a way to do so)?

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: February 07, 2004 at 6:11 AM / IP Logged

What kind of alarm are you using?Why dis-arm when remote starting?

Back to Top

Alpine Guy

Platinum - Posts: 2,478

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 18, 2003

Location: Canada

Posted: February 07, 2004 at 4:54 PM / IP Logged

Im guessing you alarm goes off when you remote start? Either because the shock sensor or the starter kill is engaging. What i did for my set up was disconnect the ignition wire from my alarm so it dosn't go off when it recieves the signal from remote starting. Just this completely disables the alarm from sensing igniton.

Now that i think of it,,im shure someone could draw up a relay bypass so it blocks current to the alarm when the remote starter is running.

Back to Top

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: February 07, 2004 at 6:13 PM / IP Logged

IF your alarm is going off when you RS your vehicle then you need to send a signal to your factory disarm wire. What kind of car do you have we can tell you what wire you need to disarm?

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Back to Top

tianlihu

Member - Posts: 34

Joined: October 08, 2003

Posted: February 08, 2004 at 12:17 AM / IP Logged

Thank you all of you, the car and alarm information as follow:

I am going to install the remote starter on 96 plymouth voyager, this car already has the aftermarket pursuit alarm installed. what I want to do is when I remote start the car , the alarm can be disarmed.

Back to Top

jgold47

Copper - Posts: 69

Joined: April 21, 2003

Location: United States

Posted: February 08, 2004 at 9:35 PM / IP Logged

what is the exact model of alarm in your car now...

what is the exact model of remote start you are trying to install...

Back to Top

tianlihu

Member - Posts: 34

Joined: October 08, 2003

Posted: February 09, 2004 at 2:46 AM / IP Logged

I don't know what model this alarm system is. but I see the brand name "pursuit" on the alarm remote control.

The remote starter is ez-start-25.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Aftermarket alarm disarm /w RS

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.