LED stays on dim when running

Home / the12volt's Install Bay / Car Security and Convenience / LED stays on dim when running (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

clearman

Member - Posts: 46

Joined: December 27, 2003

Posted: February 13, 2004 at 9:56 AM / IP Logged

I have an UltraStart 2256m installed on my 93 trans am. Everything works fine, but while the car is running, one of the leds in the antenna stays on all the time, but it is very dim. It doesn't matter if my lights are on or off, I saw one post about that. What might cause this?

clearman

Member - Posts: 46

Joined: December 27, 2003

Posted: February 13, 2004 at 11:35 PM / IP Logged

It is so dim that it can not be seen any time but at night.

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 14, 2004 at 12:44 AM / IP Logged

Do you have multiple LED's?

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

clearman

Member - Posts: 46

Joined: December 27, 2003

Posted: February 14, 2004 at 3:05 AM / IP Logged

There are two leds built in to the antenna. I have not added any, it came with two.

itmdtr

Copper - Posts: 131

Joined: May 23, 2003

Location: United States

Posted: February 14, 2004 at 7:09 AM / IP Logged

I installed a 1250M (actually three of them). You may not be getting a good tach signal.

Does the remote starter work properly?

itmdtr

clearman

Member - Posts: 46

Joined: December 27, 2003

Posted: February 14, 2004 at 10:06 AM / IP Logged

Yes, everything works great. That is the only problem.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED stays on dim when running

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.