2004 dodge durango

hi im getting one of these next week im doing a remote start dei python 881xp any info on tech soft dei forums has no info yet any body done this im also adding window roll up 2 all 4 windows I love bass

12 VOLTS CONSTANT... PINK/BLACK & RED.. IGNITION SWITCH HARNESS

IGNITION 1... DARK BLUE ... IGNITION SWITCH HARNESS IGNITION 2... DARK GREEN/ RED... IGNITION SWITCH HARNESS IGNITION 3... BLACK/ ORANGE... IGNITION SWITCH HARNESSIGNITION 4... DARK GREEN... IGNITION SWITCH HARNESSACCESSORY... BLACK/ WHITE... IGNITION SWITCH HARNESS STARTER... YELLOW... IGNITION SWITCH HARNESS

PARKING LIGHTS BLACK / YELLOW (+) AT SWITCH

PWR DOOR LOCK/UNLOCK (Single Wire System) WHITE/ GREEN    ( - )820 Ohm  

 UNLOCK  ( - ) 330 Ohm   14 Pin CONN. IN DRIVER KICK OR CTM

WINDOW UP   D\ L BLUE   ...   P\ BRN/WHT        D\ BLU/WHT  ...   P\ GRY/BLK

WIN DWN         F/  WHITE    ...   F/ VIO/WHT           R/ RED / BLK   ...   R/ GRN/WHT  BRAKE WHITE/ TAN ( + ) @ BRAKE SWITCH

FACTORY ALARM DISARM LT. GREEN/ ORANGE (-) CTM IN DRIVER KICK PANEL

FACTORY ANTI-THEFT TYPE TRANSPONDER                  (GRAY KEY ONLY)

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

04 is a new vehicle, with new wiring, I installed a starter into one a couple of weeks ago, here's the wiring: 12 VOLTS RED / blue + ignition harness     STARTER 1 pink/lt.blue + ignition harness     IGNITION 1 pink + ignition harness     IGNITION 2 pink/green + ignition harness     ACCESSORY 1 pink / YELLOW (x2) + ignition harness     Smaller pink / YELLOW may not be necesary for remote start ACCESSORY 2 pink/tan + ignition harness     Required for remote start. Airbag light triggers if this wire is not energized during start KEYSENSE violet/brown - ignition harness     POWER LOCK violet/green type h main harness, left of brake pedal     Lock requires ground through 330 ohm resistor. Must use relay. POWER UNLOCK violet/green type h main harness, left of brake pedal     Unlock requires ground through 100 ohm resistor. Must use relay. DISARM NO UNLOCK see disarm note   black plug, left of brake pedal     FACTORY ALARM ARM lt GREEN/ orange type h black plug, left of brake pedal     Arm/Lock requires ground through 620 ohm resistor.Must use relay. FACTORY ALARM DISARM same as arm type h black plug, left of brake pedal     Dirarm/Unlock requires ground through 1500 ohm resistor. Unlock is double pulse. Must use relay. TACH not BROWN / white ac coil     Tach can be found at any of the ign coil packs. For example Blue wire at coil on driver's side. ITEM NOTE INFOTECH # Immobilizer Use DEI part number 555U.     Special Note Extra keys are worth around $156.00. The chip cannot be removed from the keyfob. If IP display says "key in fob is invalid" when remote starting then try placing the antena ring in a diffrent location -- not easy. To program a new key, use two originals and follow Chrysler key programming procedure wait for "security" to flash to end programing. Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta