Soft on/off for side markers

Home / the12volt's Install Bay / General Discussion / Soft on/off for side markers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Dan_uk

Member - Posts: 2

Joined: March 12, 2004

Location: United Kingdom

Posted: March 12, 2004 at 2:30 PM / IP Logged

Im trying to devise a way to make my side marker lights (or running lights? not sure of the US terminology!) fade on when the switch is pressed on the dash, and then fade off when the switch is turned off. Basically, I just need a circuit which will fade a 12v filament bulb on when a current is applied, then fade it off when the current is removed.

Is there a simple way to do this, maybe using capacitors? The duration of the fade only has to be 2-3 seconds.

Thanks in advance

Back to Top

cbag1

Copper - Posts: 59

Joined: February 26, 2004

Location: Canada

Posted: March 16, 2004 at 11:28 AM / IP Logged

Check this up might help to meet your needs.

http://www.webelectricproducts.com/products.htm

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Soft on/off for side markers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.