Hints on installing RSX3.5?

Home / the12volt's Install Bay / Car Security and Convenience / Hints on installing RSX3.5? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

04Sahara

Member - Posts: 12

Joined: March 17, 2004

Posted: March 19, 2004 at 10:57 AM / IP Logged

I'm doing a RSX 3.5 on a 2004 Wrangler Sahara (mine) along with a 508D (perimeter sensor) and 524N (power door lock motors).

Can I power the 524N's directly off the harness or am I going to need relays to do it. The RSX3.5 doesn't have any info on the power door lock interface as the install guide for the 524N's say they should.

TIA

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: March 19, 2004 at 2:40 PM / IP Logged

the 3.5 comes with a 451M dual relay DRL module (unless the dealer snaked it out of the box) and thats all you should need

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

04Sahara

Member - Posts: 12

Joined: March 17, 2004

Posted: March 19, 2004 at 4:26 PM / IP Logged

Ahh... there it is hidden behind the resistors :) Thanks!

kgerry wrote:

the 3.5 comes with a 451M dual relay DRL module (unless the dealer snaked it out of the box) and thats all you should need

04Sahara

Member - Posts: 12

Joined: March 17, 2004

Posted: March 19, 2004 at 4:28 PM / IP Logged

One more: It says to connect a wire to the dome light/supervision wire and 03's have a yellow wire. I can't find it on my headlight harness. Is it somewhere else or should I just connect it to the door switch (other wiring for 03's said to hook it to that.

I'm guessing it's to turn on my domelight when I disarm so I can check to make sure no one's hiding in the back seat :) My car already turns the domelights on for a few secs when I turn the ignition off...

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: March 20, 2004 at 1:03 AM / IP Logged

You should find that dome light wire and use a relay to power it up

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hints on installing RSX3.5?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.