2001 Civic Immobilizer, DEI 555U

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Civic Immobilizer, DEI 555U (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gpgtp00

Copper - Posts: 81

Joined: April 11, 2002

Location: United States

Posted: April 12, 2002 at 9:41 PM / IP Logged

Whats up to all? 2001 Civic Immobilizer, DEI 555U -- posted image.

I was wondering if anyone has installed a remote start on a 2001 Honda Civic before. I have the DEI 555U Immoblizer and in the instructions, it says that on some cars you have to/ or can tap into the factory antenna for the immobilizer. I was wondering if anyone knows the color code and what wires are what. Also, its a standard and im trying to figure out how to bypass the clutch switch. It has two of them. Any help or ideas? Thanks 2001 Civic Immobilizer, DEI 555U -- posted image.

Back to Top

sador

Copper - Posts: 57

Joined: March 25, 2002

Location: United States

Posted: April 14, 2002 at 9:24 PM / IP Logged

Hi, gpgtp00

What you have to do is just follow the instruction of the 2001 Civic Immobilizer, DEI 555U -- posted image. 555U (Standar Immobilizer Interface)and than the Red Wire to the White wire 12 V (Ignition Harness)and the Blue Wire to the Status Output of the Remote Start System. That is it and I guaranted that gonna work. I just finished installing my Car Alarm and Remote Start on my Civic 2001 LX and work Excellent. Phyton 1500 ESP.Good Luck 2001 Civic Immobilizer, DEI 555U -- posted image. Sador!

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 14, 2002 at 9:29 PM / IP Logged

Honda uses a (-) trigger clutch activation so just strip back the wires on one of the 2 wires that you have and connect it to a ground source for a test. Turn over the car ( make sure it's in neutral and in a well ventilated area ) and if it starts, you have the right wire and if not try the other wire. When you have the correct wire figured out, then connect the ground out when running wire to this wire and your set.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Civic Immobilizer, DEI 555U

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.