Help with Rattler 369D

Home / the12volt's Install Bay / Car Security and Convenience / Help with Rattler 369D (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rnd4eva

Member - Posts: 1

Joined: May 13, 2004

Posted: May 13, 2004 at 9:33 PM / IP Logged

I connected all teh ignition wires but have no idea on how to incorporate the door locks. The unit comes with a relay and a thing of three wires but I can't figure out which wire from the unit to use. It says to use the main harness wires (light green, and light blue)but I can;t find those wires on the main harness. Please help me and explain how I can install this in detail and anything else I should know. The only wires I connected on the 9 pin harness are the white with a fuse and the ground. Please give me a detailed explanation. Thank YOU SOOO MUCH!

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: May 14, 2004 at 12:46 AM / IP Logged

i think this is just a standalone RS unit w/o alarm nor keyless entry. if it has keyless entry, the kit will come w/ a two wire harness, blue and green.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: May 14, 2004 at 1:57 AM / IP Logged

For the door locks you will use the relay which plugs into the 3-pin harness(blue, red, and green wires). The relay wiring will depend on the type of locking system. What kind of vehicle are you doing the install on?

Back to Top

Search for other posts by chriswallace187

evolutionoftym

Member - Posts: 39

Joined: January 06, 2004

Location: United States

Posted: May 15, 2004 at 8:30 PM / IP Logged

The 369D does have doorlocks you just need to (depending on vechicle) us these the green and blue for negative D. locks or use the dei 451m (which should have been supplied) for positive

Back to Top

Search for other posts by evolutionoftym

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help with Rattler 369D

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.