Door wiring

Home / the12volt's Install Bay / Car Security and Convenience / Door wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Lubrano

Copper - Posts: 113

Joined: October 19, 2003

Posted: May 22, 2004 at 9:37 PM / IP Logged

I need to get wires from the brain of the 591XV unit to the memory seat buttons located in the door. This is a 99 Jeep Grand Cherokee. What is best method to get the wires from the cabin to the door? These jeeps have a plug I believe called a molex plug that connects the door wiring to the cabin. Any suggestions will be a great help.

Sal

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 22, 2004 at 10:20 PM / IP Logged

just take a peek at it ans see if there is a way to fish it through..........

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Lubrano

Copper - Posts: 113

Joined: October 19, 2003

Posted: May 22, 2004 at 10:24 PM / IP Logged

No. It is almost impossible. This plug has a male and female connection which can be seperated and is completly sealed on the outsides.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 22, 2004 at 11:01 PM / IP Logged

where is a will, there is a way........

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

tarix

Member - Posts: 14

Joined: May 06, 2004

Location: United States

Posted: May 23, 2004 at 3:35 AM / IP Logged

I think what draasch meant is:

Where there is a drill there is a way. ;)

Lubrano

Copper - Posts: 113

Joined: October 19, 2003

Posted: May 23, 2004 at 10:13 AM / IP Logged

If I make two holes one in the door and one in the cabin is there a way to make the wires look professional. Wires passing through looks horrible!

Lubrano

Copper - Posts: 113

Joined: October 19, 2003

Posted: May 23, 2004 at 10:14 AM / IP Logged

If I make two holes one in the door and one in the cabin is there a way to make the wires look professional. Maybe even a plug that can be disconnected like the factory ? Where can Ipurchase something like that? Wires passing through looks horrible!

ohio420jb

Member - Posts: 26

Joined: May 20, 2004

Location: United States

Posted: May 23, 2004 at 10:31 AM / IP Logged

couldnt you just cut into them at the kick panel? or follow the fatory wiring through the door?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.