99 Malibu 530ESP w/remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 99 Malibu 530ESP w/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Qeizx

Member - Posts: 2

Joined: May 23, 2004

Location: United States

Posted: May 23, 2004 at 1:53 PM / IP Logged

I have a 99 Malibu that I am planning on installing a DEI 530ESP w/remote start. The car did not come with a factory alarm or keyless entry, but does have Passlock. My question is, before I get into this is there anything I will need to have , or know, to avoid problems and make this work? Also do I need to install the starter kill relay while having Passlock?

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: May 24, 2004 at 8:35 PM / IP Logged

This wiring diagram might help. You will need a multimeter. Maybe some relays.

Chevrolet

Malibu

1997-2000

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW	IGNITION SWITCH HARNESS *
Ignition #1:	PINK	IGNITION SWITCH HARNESS
Ignition #2:	DK. GREEN	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	ORANGE	IGNITION SWITCH HARNESS
Brake Light:	LT. BLUE	AT PLUG ABOVE BRAKE SWITCH
Tach Signal:	WHITE	AT ICM TOP REAR OF ENGINE
Parking Lights:	DK. BROWN (+)	AT HEADLIGHT SWITCH
Headlights:	DK. BLUE (-)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:
OEM Alarm Arm:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* This Vehicle Is Equipped With GM's PASSLOCK II Anti-Theft System; See Note #113 - Bypassing GM's PASSLOCK II Passive Theft System Diagram.

Chevrolet

Malibu

1997-2000

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	Red	Ignition Switch Harness
Starter Kill:	YELLOW	IGNITION SWITCH HARNESS *
Ignition +12 Volts:	PINK	IGNITION SWITCH HARNESS
Dome Lights/Superv:	LT. GREEN/ BLACK (-)	OR LT. BLUE AT B.C.M **
OEM Horn:	BLACK (-)	AT STEERING COLUMN
Power Lock:	LT. BLUE	DRIVER'S KICK PANEL ***
Power Unlock:	WHITE	DRIVER'S KICK PANEL ***
Trunk Release:	BLACK (+)	AT TRUNK RELEASE SWITCH
Alarm Input Wire:	LT. GREEN/ BLACK (-)	OR LT. BLUE AT B.C.M **
Notes:	LT. GREEN/ BLACK (-) For Driver's Door Only & LT. BLUE (-) For ALL Other Doors. Diode Isolate With Cathode (Band) Facing OEM Wires. * See Note #202 Positive Pulse Door Lock Diagram.

Manoftools

Copper - Posts: 55

Joined: May 27, 2004

Location: United States

Posted: May 27, 2004 at 10:41 AM / IP Logged

Use DEI's 555L for the passlock bipass, makes it much easier.

Qeizx

Member - Posts: 2

Joined: May 23, 2004

Location: United States

Posted: May 27, 2004 at 5:39 PM / IP Logged

Thank you for helping me with the wiring diagrams and the 555L bypass, this should make it a lot simpler of an install. If I run into any problems or questions that I don't see in the database I’ll be sure to ask. Thanks again for the help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 Malibu 530ESP w/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.