Problems with OEM 97 Acura CL 2.2 Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Problems with OEM 97 Acura CL 2.2 Alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

uiskibum

Member - Posts: 2

Joined: May 30, 2003

Posted: May 24, 2004 at 1:21 PM / IP Logged

I have a small problem. Whenever I lock the car via the remote the Security Door Lock Fuse (Under the hood #38 15amp) blows. It only happens when I use the remote and not when I lock the car with the key or bye the power door lock switch. I'm running out of 15 amp fuses!

Has this happened to anyone else, and does anyone have any ideas what is causing this?

Thanks guys!

Back to Top

kenmci

Copper - Posts: 161

Joined: July 15, 2003

Location: United States

Posted: May 24, 2004 at 2:04 PM / IP Logged

It's not blowing when you use the door lock switch because it is a different source. It could be a short within the oem alarm itself. Best bet is to look up were the factory alarm brain is and see if any of the wires have been shorted out. If all else fails and nothing looks wrong there may be an internal short in the alarm brain and honda will have to replace/repair it.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Problems with OEM 97 Acura CL 2.2 Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.