Clifford Concept 550 - Flashing

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Concept 550 - Flashing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

andy318i

Member - Posts: 4

Joined: April 02, 2004

Location: United Kingdom

Posted: June 01, 2004 at 4:33 AM / IP Logged

Hi,

I am in the process of fitting a Clifford Concept 550 G5 and the instructions specify that I link H1/13 & H1/14 up to the parking lamps.

I would like the Direction Indicators to flash in the event of a trigger instead of the parking lamps.

Will it be OK to wire the above conections into the Direction Indicators instead.

Many thanks in advance for your help.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 01, 2004 at 11:50 AM / IP Logged

yes, you may do that. if you have two wires and you have left and right indicators, then use one wire for each.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 01, 2004 at 11:51 AM / IP Logged

if you only have one indicator wire then you will only need one wire from the alarm. just make sure the one that is not used is capped off so it wont short out

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

andy318i

Member - Posts: 4

Joined: April 02, 2004

Location: United Kingdom

Posted: June 02, 2004 at 2:24 AM / IP Logged

Cheers Mate, 2 wires and I've wired them like you said......works a treat.

Thanks

Clifford Concept 550 - Flashing -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Concept 550 - Flashing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.